Fiberglass Fire Blanket for Emergency Survival, 1.8m x 1.8m

Fiberglass Fire Blanket 1.8mx1.8m Dubai Sonasa Trading 

A kitchen grease fire, a welding spark, or a clothing ignition gives 3 to 8 seconds before the situation escalates beyond control.

Fibreglass fire blanket 1.8m x 1.8m from Sonasa Trading deploys in under 4 seconds by pulling the quick-release tabs, smothering Class A, B, and K flames by cutting off the oxygen supply without chemicals, without pressure, and without prior training.

At 430 to 550 GSM woven fiberglass construction, the 1.8m x 1.8m surface covers a commercial cooker, a welding bay spark zone, or a full-size adult in a clothing-fire emergency making this the correct size for UAE industrial kitchens, warehouses, and vehicle bays.

Key Features of This Fiberglass Fire Blanket

• 430 to 550 GSM woven fiberglass fabric withstands sustained contact temperatures up to 550°C without melting, tearing, or releasing toxic fumes during deployment
• 1.8m x 1.8m surface area covers large cooking ranges, industrial equipment bases, and a standing adult simultaneously  single-person coverage requires at minimum this size
• Quick-release pull tabs mounted at both bottom corners allow one-handed deployment from the wall-mounted case in under 4 seconds, requiring zero prior training
• Airtight woven construction creates an oxygen barrier across the full blanket surface the moment it contacts the fire source, starving the flame at the base rather than at the top
• Fire suppression blanket housing mounts flush to any wall, keeping the blanket within arm’s reach at the designated hazard point in kitchens, labs, and plant rooms
• Reusable for minor fire contact after inspection; replace immediately following any major deployment where the blanket absorbed significant heat at the centre panel

Specifications

Specification	Detail
Material	Woven fiberglass fabric (430 to 550 GSM)
Size	1.8m x 1.8m (6ft x 6ft)
Heat Resistance	Up to 550°C sustained contact
Fire Classes Covered	Class A (solid), Class B (liquid), Class K (cooking oil), small electrical
Deployment System	Dual quick-release pull tabs at base corners
Housing Type	Wall-mountable compact case (PVC or fabric)
Standard Compliance	EN 1869:2019, ASTM F1989
UAE Compliance	UAE Civil Defense fire safety equipment requirements
Reusability	Reusable for minor contact; replace after major deployment
Pack Size	Contact Sonasa Trading for single unit and bulk pricing

 

Safety Information

• The fiberglass fire blanket covers Class A, B, K, and small electrical fires only. Do not deploy on high-voltage electrical fires above 1kV, pressurised gas fires, or any fire that has already spread beyond a 1.8m surface perimeter — evacuate and call UAE Civil Defense (997) immediately
• Leave the deployed blanket in position for a minimum of 15 to 20 minutes after the flame extinguishes. Lifting the blanket too early re-introduces oxygen and can reignite the fire at the source
• Wear heat-resistant gloves when handling a deployed blanket post-suppression; the fiberglass surface retains heat for up to 30 minutes after contact with a flame above 300°C
• Inspect the blanket every 6 months for fraying edges, heat-discolouration spots at the centre, or damage to the pull-tab stitching. A compromised blanket cannot form the airtight seal required to smother flames
• UAE Civil Defense regulations require accessible fire suppression equipment in commercial kitchens, industrial workspaces, and residential buildings above 3 floors; confirm placement compliance with the local Civil Defense authority for your specific site classification

 

How To Use This Fire Safety Blanket 1.8m

• Pull both quick-release tabs downward simultaneously to release the blanket from the wall-mounted case in one motion
• Hold the blanket in front of the body with both hands gripping the top corners, keeping the blanket surface between the hands and the fire as a heat shield
• Approach the fire low and from upwind, walking steadily — do not run, as sudden movement fans oxygen toward the flame
• Lay the blanket flat over the fire source starting at the near edge and draping forward, sealing all four edges against the surface underneath
• Leave the blanket in place without lifting for a minimum of 15 to 20 minutes to allow the fire to fully extinguish and the heat source to cool
• Call UAE Civil Defense (997) after any deployment to report the incident and arrange professional inspection of the fire site before resuming operations

 

Where This Fiberglass Fire Blanket Is Used

Fire suppression blanket stock from Sonasa Trading moves across a wide range of high-risk environments in the UAE. Commercial kitchens in Dubai hotels, mall food courts, and restaurant strips across Deira and Jumeirah mount the fire safety blanket 1.8m size beside cooking ranges as a first-response tool for grease and oil fires that a standard extinguisher would spread rather than suppress.

Welding bays and fabrication workshops in Al Quoz Industrial Area and Sharjah Industrial Zone keep fiberglass fire blankets at each hot-work station to contain spark-ignition incidents before they reach stored materials.

Automotive garages, EV charging stations, and vehicle fleet operators across Jebel Ali Free Zone and Dubai Investments Park use the 1.8m x 1.8m size to isolate battery fire incidents, where the blanket contains both flame and toxic off-gas during the critical first 20-minute suppression window. Schools, hospitals, and government buildings across Abu Dhabi and RAK stock these as Civil Defense-compliant emergency fire blankets alongside extinguisher stations.

Order This Fire Blanket Wholesale in Dubai

Sonasa Trading supplies fiberglass fire blankets in single units and bulk cartons with 24/7 WhatsApp wholesale support and fast dispatch across Dubai, Sharjah, Abu Dhabi, Ajman, and RAK. Procurement officers sourcing broader site fire safety and PPE requirements can browse safety materials Dubai for complementary protective equipment. For the full Sonasa Trading catalogue across tools, safety gear, and industrial consumables, visit all industrial products.

FAQ

What size fire blanket do I need for a commercial kitchen?

A fire safety blanket 1.8m x 1.8m covers full commercial cooking ranges and grease fire scenarios in UAE commercial kitchens. The 1.8m x 1.8m fiberglass fire blanket is the minimum recommended size for any kitchen with a range wider than 90cm. Smaller 1.2m x 1.2m blankets suit domestic hobs only.

Can a fiberglass fire blanket be reused after deployment?

A fire suppression blanket used on a minor fire can be reused after a professional inspection confirms no heat damage to the centre weave or pull-tab stitching. After any major deployment above 400°C sustained contact, replace the fiberglass fire blanket immediately. EN 1869:2019 requires the blanket to maintain its airtight oxygen barrier at full integrity before reuse.