Leather Working Gloves (Pack Of 12 Pieces)

Leather Working Gloves 15 Inch Cuff | Dubai UAE

Welding spatter does not wait for your guard to go up. A single arc session without proper protection causes serious burn injuries. 

Leather working gloves for MIG, TIG, and stick welding are a different category entirely. They are not interchangeable with standard industrial work gloves. 

At Sonasa Trading, we supply cowhide leather working gloves with a 15-inch extended cuff. 

Each pack contains 12 pairs for fabrication shops, oil and gas contractors, and construction welding crews across the UAE.

Cowhide Split Leather at the Thickness Welding Demands

Thin leather burns and stiffens after the first few welding sessions. It loses its protective barrier faster than most PPE budgets account for. Our leather working gloves use cowhide split leather at 1.2 to 1.6mm palm thickness. 

This weight handles sustained MIG and stick welding at standard industrial amperage without charring. The cowhide absorbs radiant heat consistently across full-shift arc runs. At Sonasa Trading, this is not an upgrade option on our welding gloves. 

It is the baseline we supply to fabrication workshops across Al Quoz and Sharjah’s industrial zones. Welders sourcing a complete workshop toolkit will find our hand tools collection covers spanners, cutting tools, and more alongside this PPE.

Kevlar Stitching That Does Not Melt Mid-Session

Standard polyester thread melts above 250 degrees Celsius during active welding. Seam failure at that point exposes the finger base to direct spatter contact. 

Our leather working gloves use Kevlar-reinforced stitching across all finger joints and the cuff edge. The gunn cut construction distributes stress evenly across the palm seam during gripping. 

At Sonasa Trading, Kevlar stitching on our welder gloves meets the same specification required for oil and gas hot-work permits. It also satisfies UAE construction site PPE compliance requirements across Dubai, Abu Dhabi, and RAK.

15-Inch Gauntlet Cuff Closes the Gap Overhead Welding Creates

Short-cuff gloves leave the forearm exposed during overhead and vertical welding. Spatter travels downward in a predictable trajectory directly into that unprotected gap.

The 15-inch gauntlet cuff extends 38cm from the wrist joint to mid-forearm. It seals that exposure point completely during any welding position. Shipyard crews and structural steel fabricators specify this cuff length as standard PPE issue. 

At Sonasa Trading, procurement teams needing hard hats, safety shoes, and broader site protection will find our safety materials collection covers everything in one place.

Keystone Thumb and Flame-Retardant Lining for All-Day Comfort

A glove that fights your hand during a long shift gets removed. The keystone thumb construction angles the thumb joint to the natural welding grip position. 

This reduces tendon strain across extended MIG and stick welding sessions significantly. Inside the glove, a flame-retardant cotton inner lining absorbs perspiration during UAE workshop temperatures. 

It keeps the grip stable throughout the entire shift. The ambidextrous palm reinforcement protects the non-dominant hand’s workpiece contact point. 

Heat transfer through static metal contact accumulates fastest at that position during MIG bracing. At Sonasa Trading, these are the details that separate gloves welders wear all day from ones they discard early.

Pack of 12 for Workshop and Site-Level PPE Issue

Issuing single pairs to a welding crew creates unnecessary procurement overhead. Our leather working gloves come in a pack of 12 at Dhs. 25. This gives workshop supervisors a practical order quantity for full-crew issues. 

Fabrication shops, oil and gas contractors, and construction welding teams across Dubai order this format regularly. At Sonasa Trading, our 24/7 WhatsApp support confirms stock and processes bulk orders at any hour. 

Teams managing broader site consumables can also download our full product catalog to plan bulk orders across all product categories in advance.

Frequently Asked Questions

What welding processes are these gloves compatible with?

They are built for MIG, TIG, and stick welding across fabrication and industrial applications.

Why does the 15-inch cuff length matter?

It seals the forearm gap that overhead and vertical welding positions expose to downward spatter directly.

What thickness is the cowhide palm leather?

The palm uses cowhide split leather at 1.2 to 1.6mm, correct for sustained industrial welding.

Are the seams stitched with Kevlar thread?

Yes. Kevlar stitching runs across all finger joints and the cuff edge throughout the glove.

How many pairs come in one pack?

Each pack contains 12 pairs at Dhs. 25 for workshop and site-level crew issues.

Do these gloves meet EN 407 and EN 388 standards?

Yes. Contact us on WhatsApp to confirm certification documentation for your site compliance requirements.

Order Leather Working Gloves from Sonasa Trading

Need reliable welding gloves for your crew fast? Contact us on WhatsApp or by phone with your quantity. We confirm availability and pricing from Baniyas Square, Deira immediately. Consistent stock means your welding operations never run short on proper hand protection.