Aluminum Tape Pack of 24 Pieces Heat-Resistant Adhesive Foil Tape for HVAC, Insulation and Industrial Repair
A leaking duct joint on a UAE HVAC system in July does not wait for a procurement cycle. The maintenance technician needs tape that bonds immediately, holds at temperature, and does not release when the metal surface heats up during operation. The aluminum tape pack of 24 pieces at Dhs. 54 puts 24 rolls of heat-resistant adhesive foil tape into a site store or maintenance van at Dhs. 2.25 per roll. The aluminum foil backing conforms to metal duct surfaces, pipe joints, and irregular repair profiles without bridging across gaps or lifting at the edges. The pressure-sensitive adhesive grips on contact and holds through the temperature cycling that fails ordinary tapes within days.
The tape body uses a pure aluminum foil backing bonded to an acrylic pressure-sensitive adhesive layer protected by a release liner. Aluminum foil at this construction carries several simultaneous properties that no polymer tape matches. It reflects radiant heat from the surface rather than absorbing it, which keeps the adhesive layer cooler and the bond stable at elevated temperatures. It acts as a vapor barrier preventing moisture migration through insulation joints and duct seams. It conducts heat laterally across the tape surface, which prevents hot spot concentration at repair joints on insulated pipework. The foil surface resists UV degradation, which matters on outdoor insulation repair applications across UAE rooftop mechanical plant and external pipework exposed to direct sun.
MEP contractors across Dubai, Abu Dhabi, and Sharjah use aluminum foil tape on GI duct sealing as a standard installation material on commercial and industrial HVAC systems. Plumbing and pipe insulation teams use it to seal joints and repairs on mineral fibre and foam pipe lagging. Industrial maintenance technicians use it for heat shielding applications on equipment near exhaust lines, for temporary repairs on insulation cladding, and for sealing electrical conduit entries against dust and moisture ingress. At 24 rolls per pack, a single purchase at Dhs. 54 keeps a maintenance store stocked across multiple simultaneous jobs without a reorder interrupting work.
Sonasa Trading stocks the aluminum tape pack of 24 pieces at the Dubai warehouse with same-day dispatch on orders placed before 2PM. Wholesale tape orders UAE for MEP contractors, facilities management companies, and maintenance supply accounts receive trade pricing at volume. Browse the full packing and maintenance materials range or explore the complete all products collection for related site supply items. Contact the Sonasa team directly on WhatsApp +971 4 2213749 for carton pricing and GCC delivery rates on volume orders.
Key Features
- Pure aluminum foil backing with acrylic pressure-sensitive adhesive providing immediate aggressive bond to metal, glass, plastic, and mineral fibre surfaces on contact
- Heat-resistant construction rated for continuous service from minus 30 degrees C to plus 120 degrees C, covering the full operating range of UAE HVAC, plumbing, and industrial equipment
- Radiant heat reflective surface deflects thermal energy away from the tape bond line, keeping the adhesive stable at elevated surface temperatures where polymer tapes fail
- Performs as a vapor barrier at insulation joints and duct seams, preventing moisture migration that causes insulation degradation and corrosion under lagging on pipework
- 24 rolls per pack at Dhs. 54 delivers a per-roll cost of Dhs. 2.25, making consistent stock availability practical for maintenance teams, tool stores, and site supply cabinets
- UV-resistant aluminum foil surface maintains adhesion and surface integrity on outdoor applications including rooftop ductwork, exposed pipework, and external plant equipment
- Conformable dead-soft aluminum foil follows irregular joint profiles, curved pipe surfaces, and duct corners without bridging or leaving unbonded edges at the tape margin
Available Pack Options
| Pack Format | Roll Quantity | Price (Dhs.) | Ideal For |
| 24-Roll Pack | 24 rolls | Dhs. 54.0 | Site maintenance store, MEP tool van, facilities supply cabinet |
| Carton (5 packs) | 120 rolls | Contact for pricing | MEP contractor site stock, HVAC installation project, service contract supply |
| Bulk Case (10+ packs) | 240+ rolls | Wholesale pricing on request | Large MEP contracts, facilities management wholesale, tape supply resale |
In Stock at Dubai Warehouse. Same-Day Dispatch. GCC Delivery Available.
Stock held at the Sonasa Dubai facility. Orders placed before 2PM dispatch the same working day on a fully tracked service. GCC maintenance supply delivery covers Saudi Arabia, Oman, Qatar, Kuwait, and Bahrain. Contact the Sonasa wholesale team on WhatsApp for bulk aluminum tape orders UAE and trade account pricing on high-volume requirements.
Safety and Usage Guidelines
Correct Application Requirements
Clean and dry the target surface before application. Oil, dust, moisture, and loose particles on the substrate surface all reduce initial adhesion and long-term bond strength. Wipe metal duct surfaces with a clean dry cloth before applying the tape. Press the tape firmly along its full length using a roller or rigid edge tool to activate the pressure-sensitive adhesive fully across the contact area. On curved pipe surfaces, apply the tape in short overlapping sections rather than attempting to stretch a single length around the full circumference at once. The dead-soft aluminum foil conforms without tearing when worked progressively around the curve.
APPLICATION GUIDANCE: Do not apply to wet, oily, or contaminated surfaces. Minimum application temperature is 5 degrees C for adequate initial adhesion. Do not stretch the foil backing beyond its natural conformance range as this thins the foil and compromises the vapor barrier at the tape joint. Overlap joints by a minimum of 25mm for a sealed connection on duct and insulation repair applications.
âš DO NOT USE: On live electrical conductors or as a primary electrical insulation material. On surfaces exceeding the continuous temperature rating of the specific roll. As a structural repair or load-bearing patch on pressurised systems without engineering confirmation. Always confirm service temperature compatibility with your MEP engineer or site supervisor before use on critical HVAC or process pipework.
Product specifications may vary between production batches. Verify roll dimensions and adhesive rating at point of receipt. Sonasa Trading recommends consulting your MEP engineer or site supervisor before using this tape on pressurised pipework, critical HVAC seals, or any application with specific compliance requirements.
Technical Specifications
| Specification | Details |
| Product Type | Heat-Resistant Aluminum Foil Adhesive Tape |
| Backing Material | Pure aluminum foil (dead-soft, conformable) |
| Adhesive Type | Rubber resin pressure-sensitive adhesive (self-wound on release liner) |
| Release Liner | Silicone-coated paper release liner |
| Standard Roll Width | 2 inch (50mm / 48mm) |
| Standard Roll Length | Approximately 15 yards (13.7 metres) per roll |
| Pack Quantity | 24 rolls per pack |
| Price Per Pack | Dhs. 54.0 (Dhs. 2.25 per roll) |
| Temperature Range | Minus 30 degrees C to plus 120 degrees C continuous service |
| Heat Reflectivity | Aluminum surface reflects radiant thermal energy |
| Vapor Barrier | Yes, aluminum foil prevents moisture vapor transmission at sealed joints |
| UV Resistance | Yes, suitable for outdoor and exposed applications |
| Water Resistance | Waterproof aluminum foil surface with moisture-resistant adhesive |
| Flame Resistance | Aluminum foil backing is non-combustible |
| Electrical Conductivity | Electrically conductive. Not for use as electrical insulation. |
Applications
HVAC and MEP Duct Sealing
MEP contractors and HVAC technicians across Dubai, Abu Dhabi, and Sharjah use aluminum foil tape as the standard sealing material on GI duct joints, duct seams, and access panel edges across commercial and industrial air conditioning installations. The tape bonds directly to the galvanised steel duct surface, seals the joint against air leakage, and holds through the thermal cycling of start-stop HVAC operation in UAE ambient conditions. A 24-roll pack keeps an MEP site team stocked through a full duct installation phase without multiple reorders.
Pipe Insulation and Plumbing Repairs
Plumbing engineers and pipe insulation teams across UAE buildings use heat-resistant aluminum tape to seal joints on mineral fibre pipe lagging, close split repairs on foam insulation, and wrap pipe support contact points where bare metal would otherwise bridge the insulation and create a cold spot or condensation point. The tape forms a vapor barrier at the sealed joint that prevents the moisture ingress that destroys unprotected insulation on chilled water pipework in UAE building services.
Industrial Maintenance and Heat Shielding
Maintenance teams on UAE manufacturing plants, process facilities, and industrial sites use aluminum foil adhesive tape for temporary and permanent heat shield repairs on insulation cladding near exhaust lines, furnace bodies, and hot process equipment. The reflective foil surface deflects radiant heat from the tape and the substrate below it. Industrial facilities management teams carry 24-roll packs in maintenance vans as a standard fast-response repair material for insulation damage found during routine rounds.
Construction and Building Envelope
Construction contractors use heat-resistant adhesive tape for sealing vapour control layers in roof build-ups, closing insulation board joints, and sealing around mechanical penetrations through insulated panels. The aluminum foil backing resists the UV exposure on rooftop applications that degrades polymer tape within a single UAE summer. Building envelope seals made with this tape maintain their adhesion and vapor barrier function through years of outdoor exposure.
Automotive and Engineering Workshops
Automotive workshops and engineering facilities across UAE industrial zones use aluminum tape for heat wrapping on vehicle exhaust components, protecting adjacent fuel and brake lines from radiant heat during engine bay work. The conformable foil follows tight curves and irregular component profiles in confined engine spaces without tearing. The non-combustible aluminum surface provides a safe working material near heat sources where polymer tapes create a fire hazard.
Additional Information
| Field | Details |
| Product Name | Aluminum Tape Pack of 24 Pieces |
| Product Category | Heat-Resistant Adhesive Foil Tape, Maintenance and Packing Material |
| Backing Material | Pure aluminum foil (dead-soft, conformable) |
| Adhesive | Acrylic pressure-sensitive adhesive |
| Temperature Range | Minus 30 to plus 120 degrees C |
| Vapor Barrier | Yes |
| UV Resistance | Yes |
| Waterproof | Yes |
| Pack Quantity | 24 rolls per pack |
| Price Per Pack | Dhs. 54.0 |
| Price Per Roll | Dhs. 2.25 |
| Application Industries | HVAC and MEP, Plumbing, Industrial Maintenance, Construction, Automotive |
| Country of Origin | Supplied through Sonasa Trading, Dubai UAE |
| Storage | Store rolls upright in original packaging in a cool dry location below 40 degrees C away from direct sunlight |
| Supplier | Sonasa Trading CO LLC, Baniyas Square, Deira, Dubai |
| WhatsApp Wholesale | +971 4 2213749 |
Reviews
There are no reviews yet.