5″ Nylon Sling D/P

5 Inch Nylon Sling D/P 125mm Wide Flat Eye Double Point Lifting Sling UAE

Width matters in rigging. A narrow sling concentrates the full load force into a small contact zone and that pressure marks finished surfaces, compresses soft materials, and creates a stress point at the edge of the sling body. The 5 inch nylon sling D/P distributes the same load across 125mm of flat nylon webbing, which drops the contact pressure dramatically and protects the load surface through the entire lift. That is the practical reason site riggers and procurement teams in the UAE spec a wider sling on precision lifts, large fabricated components, and any load where surface integrity matters as much as the lift itself.

The webbing body is nylon polyamide, single-ply flat construction. At 5 inches (125mm) width, this sling carries a vertical WLL of approximately 4 tonnes with a minimum 5:1 design factor, meaning the certified breaking strength sits at 20 tonnes before the rated capacity is reached. In basket hitch configuration at 90 degrees, the WLL doubles to approximately 8 tonnes. Choker hitch reduces it to approximately 75 percent of vertical. Nylon absorbs shock load through marginal elongation under peak stress, which protects the crane hook and headroom hardware on fast picks. The flat soft eye at each end seats cleanly into a hook or shackle without binding. The traceability label on every sling carries the WLL, serial reference, and standard citation in compliance with EN 1492-1 and ASME B30.9 synthetic sling requirements.

Lifting precast concrete wall panels on construction sites across Dubai and Abu Dhabi is one of the most common applications for a 5 inch nylon sling in the UAE market. The wide body spreads load across the panel edge without cutting into the concrete surface. Steel fabrication shops use it for positioning large structural members and assemblies where the wider contact zone prevents edge damage on galvanised or painted finishes. Offshore platform maintenance teams use the 5 inch width for equipment and module picks where a narrow sling at the same load rating would create unacceptable surface damage on precision-machined or coated components. At lengths from 1 metre through to 12 metres, the same sling type covers tight picks in confined spaces and extended basket configurations on open deck.

Sonasa Trading stocks the 5-inch nylon sling D/P across nine standard lengths at prices from Dhs. 48 to Dhs. 228. Wholesale nylon sling orders in the UAE for rigging contractors, tool stores, and site procurement accounts receive trade pricing on volume.

Browse the full lifting tools range or compare with the 1 inch nylon sling D/P if a narrower width suits your load profile. Contact the Sonasa team directly on WhatsApp +971 4 2213749 for bulk pricing and same-day dispatch confirmation across the GCC.

Key Features

• 5 inch (125mm) flat nylon webbing body with double-point flat soft eye at both ends, rated to approximately 4 tonnes vertical WLL with a 5:1 minimum design factor
• Wide 125mm contact surface distributes load across the full web width, protecting finished, coated, and precision-machined surfaces during the lift without edge marking
• Shock load absorption through nylon elongation under peak stress reduces force transfer to crane hooks and lifting points during fast or dynamic picks
• Available in nine standard lengths from 1 metre to 12 metres covering vertical, basket, and choker hitch configurations across a broad range of industrial pick requirements
• Supplied with traceability label carrying WLL, serial number, manufacturer reference, and EN 1492-1 standard citation for site compliance documentation
• Resistant to alkalis, petroleum-based solvents, and industrial cleaning agents for sustained use in fabrication, maintenance, and offshore environments
• Lightweight and non-conductive nylon webbing body rated for use near electrical installations and in confined spaces where chain or wire rope slings create hazard

Available Lengths and Pricing

Sling Length	Price (Dhs.)	Typical Application
1 Metre	Dhs. 48	Short-reach precision pick, confined space lift, equipment positioning
2 Metre	Dhs. 70	Standard vertical hitch, precast panel lift, fabricated frame pick
3 Metre	Dhs. 92	Basket hitch on structural steel, pipe bundle, heavy equipment positioning
4 Metre	Dhs. 114	Extended basket configuration, large structural member handling
5 Metre	Dhs. 136	Wide-load basket hitch, coated steel section, long fabricated component
6 Metre	Dhs. 158	Crane rigging on construction sites, module lifts, offshore equipment
8 Metre	Dhs. 182	Large span basket hitch, marine deck operations, vessel equipment picks
10 Metre	Dhs. 205	Wide basket configuration, offshore supply picks, large structural assembly
12 Metre	Dhs. 228	Maximum span rigging, large component handling, civil infrastructure lifts

In Stock at Dubai Warehouse. Same-Day Dispatch. GCC Delivery Available.

Stock sits at the Sonasa Dubai facility. Orders placed before 2 PM are dispatched the same day on a fully tracked service. GCC lifting sling delivery covers Saudi Arabia, Oman, Qatar, Kuwait, and Bahrain. Contact the Sonasa wholesale team on WhatsApp for bulk nylon sling orders and trade account pricing on full quantity requirements.

Safety and Certification

Standard Compliance

Every 5 inch nylon sling D/P from Sonasa Trading carries a traceability label that meets the marking requirements of EN 1492-1 and ASME B30.9. The label shows the WLL at the relevant hitch configuration, a unique serial number, the manufacturer identification, and the standard reference. That documentation supports site safety audit requirements, equipment register entries, and lifting plan compliance across UAE construction, oil and gas, and marine sectors. Never use a sling without a readable and complete traceability label on any compliant lifting operation.

INSPECTION REQUIREMENT: Inspect the full sling length before every lift. Remove from service immediately if cuts, abrasion, wear through the weave, heat glazing on the webbing surface, chemical discolouration, broken eye stitching, distorted eye shape, or a missing traceability label is present. WLL reduces at sling angles below 90 degrees to the horizontal. Always apply the correct reduction factor for the hitch angle in use.

⚠ DO NOT USE: On unprotected sharp edges without corner protection boards or saddles. At temperatures above 93 degrees Celsius or below- 40 degrees Celsius. In concentrated acid environments. On any lift exceeding the rated WLL for the hitch configuration in use. Never use a damaged or unlabelled sling under any circumstances.

Product specifications and certifications may vary between production batches. Always verify the sling label at point of use. Sonasa Trading recommends consulting your site safety officer or appointed person before use in any critical or engineered lifting application.

Technical Specifications

Specification	Details
Sling Type	Flat Eye and Eye, Double Point (D/P), Type 3 Web Sling
Web Width	5 inch (125mm)
Material	Nylon (Polyamide) synthetic webbing
Ply Construction	Single-ply flat webbing body
Eye Type	Flat soft eye both ends, opening on same plane as sling body
Approximate Vertical WLL	4 tonnes (contact Sonasa for certified WLL data sheet)
Approximate Basket WLL at 90 degrees	8 tonnes
Approximate Choker WLL	3 tonnes (75 percent of vertical)
Design Factor	5:1 minimum
Available Lengths	1m, 2m, 3m, 4m, 5m, 6m, 8m, 10m, 12m
Price Range	Dhs. 48 (1m) to Dhs. 228 (12m)
Hitch Configurations	Vertical, Basket, Choker
Operating Temperature Range	Minus 40 degrees C to plus 93 degrees C
Chemical Resistance	Resistant to alkalis and petroleum solvents. Not suitable for concentrated acid environments.
Electrical Properties	Non-conductive webbing body
Compliance Reference	EN 1492-1 and ASME B30.9 synthetic sling standards
Traceability	Label with WLL, serial number, manufacturer reference, and standard citation

Applications

Construction and Civil Engineering

The 5 inch nylon sling D/P handles some of the most common precision lifts on UAE construction sites. Precast concrete wall panels, staircase units, and facade elements require a wide sling body that spreads load across the panel edge without concentrating force at a narrow contact point. The 125mm web width does exactly that. Site riggers across Dubai, Abu Dhabi, and Sharjah specify this width on any precast lift where edge chipping or surface marking creates a rejection risk on exposed architectural finishes.

Steel Fabrication and Manufacturing

Fabrication shops handling galvanised structural steel, painted assemblies, and stainless components use the 5 inch nylon sling to move finished pieces through the shop without scratching or indenting the surface coating. A wire rope or chain sling at the same load rating leaves visible marks on treated steel. The nylon webbing distributes contact pressure and the flat eye profile keeps the sling body flat against the load rather than rolling and concentrating at the edge.

Oil and Gas and Petrochemical

Maintenance contractors on UAE refineries and process plants use wide nylon webbing slings for vessel head lifts, heat exchanger bundle removal, and precision equipment positioning where the load surface carries a protective coating or lining that must not be damaged during the maintenance scope. The non-conductive nylon body provides an additional safety layer near live electrical installations in plant environments. Resistance to petroleum-based solvents and cleaning agents extends service life in areas where chemical contact is unavoidable.

Marine and Offshore Operations

On offshore platforms and supply vessels operating in the Gulf, the 5-inch nylon sling D/P handles module picks, skid handling, and equipment positioning on deck where surface damage carries a high rectification cost. The longer 8 to 12 metre lengths suit wide basket configurations on deck cargo operations. The lightweight nylon body reduces manual handling fatigue for rigging crews working in confined deck spaces compared to equivalent chain sling configurations at the same WLL.

Warehousing and Heavy Goods Handling

Distribution and logistics facilities across Jebel Ali and the Dubai industrial zones use the 5-inch lifting sling with overhead gantry cranes for handling large packaged machinery, palletised steel goods, and oversized equipment crates. The wide sling body sits under the load without the edge-cutting risk that narrow slings create on cardboard, timber, and plastic-wrapped loads at heavier weights.